advice on tune'in 02fxd
#1
advice on tune'in 02fxd
95"sbc-scottsman heads/flat top pistons/.030head gaskets/s&s510g-cams/dtt-ignition/cycleshack slips/cv40
Im going to be puting on the Mik42 & supertrapp superMeg2;1,,
I got good info on jeting the Mik,,
[/align]20 pilot jet[/align]50 acellerator nozzle[/align]98 needle w/ clip in middle slot[/align]165 main jet[/align][/align]But with an open end cap how many disks should I put on the S.T.??[/align]
Im going to be puting on the Mik42 & supertrapp superMeg2;1,,
I got good info on jeting the Mik,,
[/align]20 pilot jet[/align]50 acellerator nozzle[/align]98 needle w/ clip in middle slot[/align]165 main jet[/align][/align]But with an open end cap how many disks should I put on the S.T.??[/align]
#3
RE: advice on tune'in 02fxd
ORIGINAL: someday69
95"sbc-scottsman heads/flat top pistons/.030head gaskets/s&s510g-cams/dtt-ignition/cycleshack slips/cv40
Im going to be puting on the Mik42 & supertrapp superMeg2;1,,
I got good info on jeting the Mik,,
[/align]20 pilot jet[/align]50 acellerator nozzle[/align]98 needle w/ clip in middle slot[/align]165 main jet[/align][/align]But with an open end cap how many disks should I put on the S.T.??[/align]
95"sbc-scottsman heads/flat top pistons/.030head gaskets/s&s510g-cams/dtt-ignition/cycleshack slips/cv40
Im going to be puting on the Mik42 & supertrapp superMeg2;1,,
I got good info on jeting the Mik,,
[/align]20 pilot jet[/align]50 acellerator nozzle[/align]98 needle w/ clip in middle slot[/align]165 main jet[/align][/align]But with an open end cap how many disks should I put on the S.T.??[/align]
If it was me - Call SuperTrapp.
Trial and error - disk disk disk disk off disk disk disk off, etc.
Hope I understood your question, no ST here though.
There are a few in the Forum here.
mud
Thread
Thread Starter
Forum
Replies
Last Post
WS6 Formula
Dyna Glide Models
0
09-26-2007 04:43 AM