Sweeping beaters, ticket, now drags (also FS)
Thread Starter
|
Road Captain
Joined: Apr 2008
Posts: 577
Likes: 2
From: Brampton, Ontario, Canada
Sweeping beaters, ticket, now drags (also FS)
Hey all,
Well, over the winter I changed my Road6 bars to an awesome set of BR custom Bars (1.5 inch sweeping beaters) and had them powdered flat black. Unfortunately, after getting a ticket for them, I'm not wanting anymore un-necessary attention. I got a handlebar ticket (along with helmet) so i've replaced the bars with drag bars (which i've always been curious about).
I'm selling both the BR custom Bars and Road6 bars.
Since the BR bars are 1.5, and your probably thing that wont work, but I actually worked with loner industries to design an 1.5 inch riser to accept these bars on my stock top tree. The risers themselves look bad ***, but unfortunately mine aren't for sale. I'm fairly sure loner made quite a few of these, and can likely make more (see pics)
Both sets are perfect if your going to be doing some powder work, both could go right on your bike as long as your not a princess (no major scratches, just typical wear). infact, the BR bars have only been on for about 3000 miles.
I'm looking to get 300 for the BR bars, and 100 for the road6 bars (or best reasonable offer)
Bunch of Album pics @ http://s1058.photobucket.com/albums/t414/connorhickey/
If you want me to clean em up and take better pics let me know.
Drop me a line or give me a call (647 985 8989, or between 9-5 toll free 1866435954.
So far I like the look of the drag bars, but will miss the comfort of the apes big time!
Cheers!
Connor
Well, over the winter I changed my Road6 bars to an awesome set of BR custom Bars (1.5 inch sweeping beaters) and had them powdered flat black. Unfortunately, after getting a ticket for them, I'm not wanting anymore un-necessary attention. I got a handlebar ticket (along with helmet) so i've replaced the bars with drag bars (which i've always been curious about).
I'm selling both the BR custom Bars and Road6 bars.
Since the BR bars are 1.5, and your probably thing that wont work, but I actually worked with loner industries to design an 1.5 inch riser to accept these bars on my stock top tree. The risers themselves look bad ***, but unfortunately mine aren't for sale. I'm fairly sure loner made quite a few of these, and can likely make more (see pics)
Both sets are perfect if your going to be doing some powder work, both could go right on your bike as long as your not a princess (no major scratches, just typical wear). infact, the BR bars have only been on for about 3000 miles.
I'm looking to get 300 for the BR bars, and 100 for the road6 bars (or best reasonable offer)
Bunch of Album pics @ http://s1058.photobucket.com/albums/t414/connorhickey/
If you want me to clean em up and take better pics let me know.
Drop me a line or give me a call (647 985 8989, or between 9-5 toll free 1866435954.
So far I like the look of the drag bars, but will miss the comfort of the apes big time!
Cheers!
Connor
Thread Starter
|
Road Captain
Joined: Apr 2008
Posts: 577
Likes: 2
From: Brampton, Ontario, Canada
These bars were definitely worth the 6 week wait, mine have a slight bend too, love it!
I got the ticket because where I live (toronto, Canada) they've begun cracking down on tall handle bars. The law out here is from the top of the seat to the bottom of the bars, height cannot exceed 38cm (15 inches-ish).
I got the ticket because where I live (toronto, Canada) they've begun cracking down on tall handle bars. The law out here is from the top of the seat to the bottom of the bars, height cannot exceed 38cm (15 inches-ish).
Thread Starter
|
Road Captain
Joined: Apr 2008
Posts: 577
Likes: 2
From: Brampton, Ontario, Canada
ticket was 110 for the bars, 110 for the helmet. bullshit part is it affects my insurance! if it was 110 for the bars and didn't ding my insurance i'd keep em and just pay the comfort tax!
Thread
Thread Starter
Forum
Replies
Last Post
