Slammed and Bobbed 2009 SB
Thread Starter
|
Tourer
Joined: May 2012
Posts: 262
Likes: 1
From: New Jersey
Slammed and Bobbed 2009 SB
Just finished my test ride after completing my yearly changes to my scoot......nothing fell off.......
21 inch wide glide front wheel with a 100/90 tire
Cut fender struts and bobbed rear fender, painted with plasti dip
FXDF shocks, sanded to knock the shine off em....
5 3/4 inch headlight
Klockwerks Perfecta apes, powder coated gloss black
Avon grips
DK customs bear trap pegs
S&S intake
Custom exhaust made from cut down Rinehart Churchills, wrapped in DEI titanium wrap, ceramic coated pipes.....
1.75" rear lowering kit
LED turn signal, EBAY
Road 6 customs side plate mount and Model A tail light.
More to come, but here's where it's at.....
21 inch wide glide front wheel with a 100/90 tire
Cut fender struts and bobbed rear fender, painted with plasti dip
FXDF shocks, sanded to knock the shine off em....
5 3/4 inch headlight
Klockwerks Perfecta apes, powder coated gloss black
Avon grips
DK customs bear trap pegs
S&S intake
Custom exhaust made from cut down Rinehart Churchills, wrapped in DEI titanium wrap, ceramic coated pipes.....
1.75" rear lowering kit
LED turn signal, EBAY
Road 6 customs side plate mount and Model A tail light.
More to come, but here's where it's at.....
Just finished my test ride after completing my yearly changes to my scoot......nothing fell off.......
21 inch wide glide front wheel with a 100/90 tire
Cut fender struts and bobbed rear fender, painted with plasti dip
FXDF shocks, sanded to knock the shine off em....
5 3/4 inch headlight
Klockwerks Perfecta apes, powder coated gloss black
Avon grips
DK customs bear trap pegs
S&S intake
Custom exhaust made from cut down Rinehart Churchills, wrapped in DEI titanium wrap, ceramic coated pipes.....
1.75" rear lowering kit
LED turn signal, EBAY
Road 6 customs side plate mount and Model A tail light.
More to come, but here's where it's at.....
21 inch wide glide front wheel with a 100/90 tire
Cut fender struts and bobbed rear fender, painted with plasti dip
FXDF shocks, sanded to knock the shine off em....
5 3/4 inch headlight
Klockwerks Perfecta apes, powder coated gloss black
Avon grips
DK customs bear trap pegs
S&S intake
Custom exhaust made from cut down Rinehart Churchills, wrapped in DEI titanium wrap, ceramic coated pipes.....
1.75" rear lowering kit
LED turn signal, EBAY
Road 6 customs side plate mount and Model A tail light.
More to come, but here's where it's at.....
__________________
DKCustomProducts.com
DKCustomProducts.com
Thread
Thread Starter
Forum
Replies
Last Post
hoghead58
Frame/Suspension/Front End/Brakes
4
Apr 14, 2008 11:50 PM
