Electrical Problem
Thread Starter
|
Stage IV
Joined: May 2019
Posts: 4
Likes: 0
From: Arkansas
Electrical Problem
I removed the tour pack off of my 06 Electra Glide Ultra Classic CVO, now the Brake lights and turn signals are not working, I have checked the fuses and they look Ok, What could be the problem ?
Seasoned HDF Member
Joined: May 2008
Posts: 21,208
Likes: 12,796
From: South Carolina
Are you certain the brake light and turn signals were working before you removed the tour pack?
Front turn signals not working also?
There are three separate circuits involved here:
Turn signals get their power from the TSSM, which is powered by the battery fuse.
Brake light is powered by the cruise/brake fuse via the brake relay.
The brake relay is controlled by the brake light switch which is powered by the accessory fuse.
Three fuses to replace, cruise/brake fuse, accessory fuse, battery fuse.
Front turn signals not working also?
There are three separate circuits involved here:
Turn signals get their power from the TSSM, which is powered by the battery fuse.
Brake light is powered by the cruise/brake fuse via the brake relay.
The brake relay is controlled by the brake light switch which is powered by the accessory fuse.
Three fuses to replace, cruise/brake fuse, accessory fuse, battery fuse.
Thread
Thread Starter
Forum
Replies
Last Post
pikeysxtcob
Dyna Glide Models
4
Apr 11, 2016 04:21 PM
nineball
Touring Models
0
Jun 23, 2015 11:26 PM
