COMPLETE gasket set
Thread Starter
|
Novice
Joined: Aug 2020
Posts: 16
Likes: 2
From: west virginia
COMPLETE gasket set
does anyone have a supplier that sells an all inclusive engine gasket set? because of a slipped balancer sprocket on my 03 fatboy w/ 88B it was necessary to bust the engine down to the bone. With the issue now corrected ive turned my attention to gaskets, ive searched high and low online and even checked with the stealership with no luck. sure, i can buy all the gaskets individually but was hoping to locate every o-ring and and gasket in one all inclusive package at possible savings.
HDF Community Team
Joined: Jun 2006
Posts: 12,774
Likes: 2,606
From: san antonio
Check out CYCO (US Seal) gasket kits. You should be able to get everything for less than $100. Motor kit, cam chest kit, o-ring kit and primary kit will have most of what you need. Good quality, I have used on several builds with no issues.
https://cycogasket.com/twin-cam/gasket-kits.html
https://cycogasket.com/twin-cam/gasket-kits.html
Thread Starter
|
Novice
Joined: Aug 2020
Posts: 16
Likes: 2
From: west virginia
thanks guys, Ive checked out both. while neither seem to offer such kits on their site I've sent messages to both, hopefully between the two someone offers a complete kit. I was actually surprised cometic didint but then that is a 17 year old motor....... lol
HDF Community Team
Joined: Jun 2006
Posts: 12,774
Likes: 2,606
From: san antonio
The OP is not going to find a completed set of gaskets, o-rings, etc. from anyone. I have use CYCO gaskets an many builds and know that 99% of the gaskets and o-rings can be purchased from CYCO by buying different gasket sets. Having dealt with CYCO and having an account there, I would bet the if the OP gave them a call, they would pull together the four kits listed in my previous and offer a discount off the individual kits for purchasing all of them. just ask.
The CYCO gaskets are the same quality as Cometic but about half the price; the OP should give them a call.
The CYCO gaskets are the same quality as Cometic but about half the price; the OP should give them a call.
Grand HDF Member
Joined: Sep 2017
Posts: 4,359
Likes: 1,219
From: Dubuque, IA
Check out CYCO (US Seal) gasket kits. You should be able to get everything for less than $100. Motor kit, cam chest kit, o-ring kit and primary kit will have most of what you need. Good quality, I have used on several builds with no issues.
https://cycogasket.com/twin-cam/gasket-kits.html
https://cycogasket.com/twin-cam/gasket-kits.html
Thread
Thread Starter
Forum
Replies
Last Post
