When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Engine Mechanical TopicsDiscussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.
I have an opportunity to buy a 2008 TC out of a softail that has been professionally built to 110 cubic inches for $2200. Has 490 miles on rebuild. Will this fit in a 2006 Ultra classic frame?
No. For a whole lot of reasons
Totally different engine cases and primaries. Check Ronnie's harley parts finder for parts numbers between different years
Necessity is the Mother of Invention. It will fit . . . . with a "little" persuasion, some cutting and welding to redesign the frame and a lot of cussing to make it fit. LMAO
The problem is it's a 2006 and probably already has other problems. 2006 was not a great year for touring and dyna twin cams.
I want to hear that explanation as well. 2006 was an upgrade year for the Dyna; new frame geometry; six speed gearbox, 49mm forks. All models benefited from better flowing heads in '06. Seems to me '06 was not a bad year for either.
2006 was the guinea pig year for the Dyna (remember the new inner primary bearing install promise for free every 15,000 miles?) but there was no such experimentation on the '06 touring, just improvements.
2006 was the guinea pig year for the Dyna (remember the new inner primary bearing install promise for free every 15,000 miles?) but there was no such experimentation on the '06 touring, just improvements.
Guinea pig year with the Cruisedrive 6 speed, improved frame geometry and 49mm forks and let's not forget the higher flowing heads. Guinea pig year doesn't necessarily have to be a problem year.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.