Andrews Cams
Stellar HDF Member
Joined: Jul 2011
Posts: 2,583
Likes: 115
From: Boston, MA
I bought my fltr with a ev23. It was fine and like Mr JZ says they a bolt in cam and will make you happy, not super duper elated. They go in easily, reuse the stock rods. Really not too much fuss. I got a hold of a Wood w6 and will say the only, and I mean only one, drawback is the w6 is noisier. It is superior in every other way, seat of my pants tells me so.
Good luck,
Tom
Good luck,
Tom
Road Master
Joined: Feb 2014
Posts: 913
Likes: 5
From: indiana
I bought my fltr with a ev23. It was fine and like Mr JZ says they a bolt in cam and will make you happy, not super duper elated. They go in easily, reuse the stock rods. Really not too much fuss. I got a hold of a Wood w6 and will say the only, and I mean only one, drawback is the w6 is noisier. It is superior in every other way, seat of my pants tells me so.
Good luck,
Tom
Good luck,
Tom
I can live with that kind of noise
Outstanding HDF Member
Joined: Nov 2013
Posts: 2,358
Likes: 34
I bought my fltr with a ev23. It was fine and like Mr JZ says they a bolt in cam and will make you happy, not super duper elated. They go in easily, reuse the stock rods. Really not too much fuss. I got a hold of a Wood w6 and will say the only, and I mean only one, drawback is the w6 is noisier. It is superior in every other way, seat of my pants tells me so.
Good luck,
Tom
Good luck,
Tom
Just asking, I'm sticking with what I ordered, but do like to understand it all.
Seasoned HDF Member
Joined: Mar 2010
Posts: 21,093
Likes: 7,622
From: Poolville
Think about it.
If you like more lower end and your bike is lighter think how less weight affects the ratio.
Tourer
Joined: Dec 2014
Posts: 268
Likes: 69
From: Edgerton Wisconsin
There isn't a lot of info out there about it but the s&s 508 is an awesome cam for making a lot of low end torque.
I've never run an Andrews so I can't compare, but ANYTHING is better than a stock n grind!
I've never run an Andrews so I can't compare, but ANYTHING is better than a stock n grind!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Master
Joined: Feb 2014
Posts: 913
Likes: 5
From: indiana
When I was picking a cam, the W6 is a hair over .5 lift, I thought .5 was the limit on bolt in cams? The w6 and the evl3020 have the same duration at 240 with similar overlap, 36v38, but the 3020 is .5, I went 3010 over the 3020 with 234 234 because I wanted more low-mid. When I was reading it looked like everyone with the W6 had headwork done along with pistons and some other mods to boost compression. So the W6 runs fine on an otherwise stock engine?
Just asking, I'm sticking with what I ordered, but do like to understand it all.
Just asking, I'm sticking with what I ordered, but do like to understand it all.
