When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Juse a heads up. I ordered a Mustang Sport Touring seat for my 95' e-glide and it does not come back far enough for passenger. I have a corbin that is 3" longer and a fresh specialties that 2.5" longer. I have ran the wide touring on 4 different bikes without issue.
Last edited by codybear; Jun 23, 2015 at 09:08 AM.
It looks like the seat isn't mounted right.
I don't know of any seat that is supposed to cover the bottom of the tank consol.
Have you contacted Mustang and sent them that picture?
It may be a manufacturers defect.
It is mounted correctly. That is how they sit on 89-95 model flht's. The dash panel stops where the seat starts. I contacted them and was told "the seat can't be to short or the mount wouldn't line up". I included pictures of all 3 seats so they could see the difference. Haven't received a reply since. I can assure you it was mounted correctly. I've been around bikes my whole life and used to chop them up. After waiting a few days for a reply, I called them and was told that "it was made that way to accommodate different options". I used to be a fan of Mustang seats. Not sure what I'm going to try next. Seats are very limited for my year.
Can't you move the tour pak forward? It looks like you have to room to do so.
They are probably right, if you have a full sized passenger pad with arm rests it might fit. Yours seems to be very thin.
However, I think the way they use the term "sports" suggests it is going to be smaller, i.e. a "1.5", mostly one up and not for long distance two up riding.
What the problem, is your passenger too big to fit in the gap or is the backrest too far back for them?
Originally Posted by texashillcountry
I don't know of any seat that is supposed to cover the bottom of the tank consol.
They do that on Road Kings too. It acts like a chute for rainwater.
Last edited by Lucky Luke; Jun 25, 2015 at 08:26 PM.
Can't you move the tour pak forward? It looks like you have to room to do so.
They are probably right, if you have a full sized passenger pad with arm rests it might fit. Yours seems to be very thin.
However, I think the way they use the term "sports" suggests it is going to be smaller, i.e. a "1.5", mostly one up and not for long distance two up riding.
What the problem, is your passenger too big to fit in the gap or is the backrest too far back for them?
They do that on Road Kings too. It acts like a chute for rainwater.
It is an aftermarket tour pack and it does sit back a little further than stock. If you look at the mounting plate for the tour pack you can see the gap. No matter how you look at it the mustang is 2.5-3" shorter than my corbin, drag specialties and stock OEM seat. I'very had them all mounted measured them with a tape measure.
It was surely the "sport" version that messed up your seating arrangement. I have the wide touring with conchos on my 94 with the tourpak back a bit and it fits nicely in there.
Go with the wide touring and you'll be golden dude.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.