EVO All Evo Model Discussion

Starter Question

Thread Tools
 
Search this Thread
 
Old Nov 9, 2016 | 12:47 PM
  #1  
dirtbag1's Avatar
dirtbag1
Thread Starter
|
Intermediate
Joined: Sep 2012
Posts: 30
Likes: 0
From: california
Default Starter Question

I have an 85 FXRS, just swapped out the tranny to a 92.Did the inner/outter primary and all the insides also. Not sure on one thing, where the staerter jack shaft comes threw on the inner primary there is the oil seal on the back side but on the inside looks like something should be there, from my searching all I could find is that there is a bushing there?? seems like there is room for a bearing?? but not sure any help.....Thanks!!
 
Reply
Old Nov 9, 2016 | 01:39 PM
  #2  
texashillcountry's Avatar
texashillcountry
Dirt don't hurt
Veteran: Navy
15 Year Member
Top Answer: 1
Top Answer: 3
Joined: Jan 2011
Posts: 21,059
Likes: 4,534
From: Haslet Texas
Default

Originally Posted by dirtbag1
I have an 85 FXRS, just swapped out the tranny to a 92.Did the inner/outter primary and all the insides also. Not sure on one thing, where the staerter jack shaft comes threw on the inner primary there is the oil seal on the back side but on the inside looks like something should be there, from my searching all I could find is that there is a bushing there?? seems like there is room for a bearing?? but not sure any help.....Thanks!!
Do you have a picture of what you have now?
There is supposed to be a bushing.

Here is the schematic for your inner primary
http://partsfinder.onlinemicrofiche....CASE%20HOUSING
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Chopper Nate
Primary/Transmission/Driveline/Clutch
1
Jul 31, 2019 09:38 AM
RidemyEVO
EVO
2
May 9, 2015 06:19 PM
HarleyReece
EVO
11
Aug 23, 2012 02:02 PM
elevenbravo78
Primary/Transmission/Driveline/Clutch
1
Dec 15, 2010 03:49 PM
Beauregard
Softail Models
2
Jun 18, 2009 04:51 AM




All times are GMT -5. The time now is 03:28 AM.