Got to chopping
Thread Starter
|
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
Got to chopping
I always wanted a fender similar to a dyna or sportster but they don't really make anything for a softail like that aftermarket. I hate the flip up softail fender and the long heritage fender. So I thought about making a dyna fender fit but then there is all of the hole filling and redrilling involved, so I decided to cut up a heritage fender I had laying around. Enjoy the pics. I will take another when it is repainted and mounted to go along with my new sixteen in front rim and slim front fender
Here is a tip: I used my dyna to make a radius out of cardboard to get the cuts even on each side
I cleaned all the edge up with a dremel and an angle grinder to make it all smooth and nice
Here is a tip: I used my dyna to make a radius out of cardboard to get the cuts even on each side
I cleaned all the edge up with a dremel and an angle grinder to make it all smooth and nice
Ultimate HDF Member
Joined: May 2006
Posts: 6,590
Likes: 444
From: Ohio
Trending Topics
Thread Starter
|
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
It's off center I just threw it in there. I normally just mug the holes to fill them and then angle grind them down to finish with a sanding bit
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
