1999 Night Train Question
Thread Starter
|
Advanced
Joined: Jun 2019
Posts: 83
Likes: 25
From: Alabama
1999 Night Train Question
Looking at a 99 Night Train with 52k miles. My question is what cam, and lifters should I use to do a refresh in them? I believe the bike is basically stock except exhaust.
or would you ride it until you had to do something?
or would you ride it until you had to do something?
Cruiser
Joined: May 2020
Posts: 231
Likes: 450
From: SW Florida
It really depends upon what you're after regarding performance. At a bare minimum replace the lifters and inner cam bearing. Use a name brand lifter and the Torrington/Koyo bearing. I don't have part numbers but there are other more knowledgeable fellows here that do.
Cruiser
Joined: Dec 2009
Posts: 157
Likes: 105
From: Tennessee
Ive got a 1997 Bad Boy and I swapped out the cam for an EV27 and a Torrington bearing. No issues. Keep it simple
.. And thats not an expensive mod.
Thats a unicorn bike btw. A 1st year NT with an Evo engine. If you dont get, please share the details.
Scott
C Co 3/75 (25 years ago )
Thats a unicorn bike btw. A 1st year NT with an Evo engine. If you dont get, please share the details.
Scott
C Co 3/75 (25 years ago )
Last edited by TheVanillaThrilla; Jul 29, 2022 at 07:43 AM.
Thread
Thread Starter
Forum
Replies
Last Post
