FXR trans service
Thread Starter
|
Road Captain
Joined: May 2007
Posts: 648
Likes: 0
From: STRONG ISLAND
FXR trans service
My manual says theres a small drain nut under the trans cover. my bike dosent have that (93 fxr ) > But theres a 7/8 nut under the trans case. is that the drain plug? if so do I need to replace washers at each service. - thanks !
HDF Community Team
Joined: Dec 2005
Posts: 5,403
Likes: 2,605
From: NC USA
RE: FXR trans service
Yep, that's the drain. And no, you don't have to change the washer every service BUT - if it's nylon/plastic like mine was, check it closley each time and don't overtighten the plug. Over time and especially if it's been overtightened, it will break and that's no good! If you want, replace it with a copper, fiber or soft aluminum washer. Tighten it about like a spark plug. You know, like one you actually might want to remove one day! 
Thread
Thread Starter
Forum
Replies
Last Post
NMDave
Primary/Transmission/Driveline/Clutch
15
Feb 21, 2008 09:23 PM
