SE Penna area recommend needed
Thread Starter
|
6th Gear
Joined: Jul 2006
Posts: 10
Likes: 0
From:
SE Penna area recommend needed
I have a 2006 Electra Glide classic with Stage 1, PCIII, Wild Pigs, Dual V&H headers and want to take the real next step - big bore and cam. I'm ready for stronger low end torque. Any recommendations for the SE Penna area. I'm in Montgomery County.
Outstanding HDF Member
Joined: May 2007
Posts: 2,304
Likes: 31
From: Florida
RE: SE Penna area recommend needed
Zepka Harley Davidson in Johnstown.....ask for Brian Beckley. Brian is a good tuner on the PC and SERT plus he can do the build for you too.
Battle Field Harley Davidson in Gettysburgh....ask for Mike. These guys also tune well with the PC and SERT
Horse Power HarleyDavidson in Willamsport....ask for Tom.Tom is a good tech, I will be there onOctworking with them on the SERT and PC Training.
Thats about as close as I can get you to a reputable shop, good luck.
Battle Field Harley Davidson in Gettysburgh....ask for Mike. These guys also tune well with the PC and SERT
Horse Power HarleyDavidson in Willamsport....ask for Tom.Tom is a good tech, I will be there onOctworking with them on the SERT and PC Training.
Thats about as close as I can get you to a reputable shop, good luck.
Thread Starter
|
6th Gear
Joined: Jul 2006
Posts: 10
Likes: 0
From:
RE: SE Penna area recommend needed
Thanks DOC1. Lots of good recommendations. I'll give them all careful consideration. Do you have experience with Cycle Stop, Norristownor Bikes Built Better in Horsham?? They are both within 20 minutes of me.
Outstanding HDF Member
Joined: May 2007
Posts: 2,304
Likes: 31
From: Florida
RE: SE Penna area recommend needed
Sorry I sure don't....it's not uncommon for Harley owners having to travel long distances for a good tune. Good dyno operators and SERT tuners are far and few between. I've had people come from Washington DC to Orlando for me to tune their bikes...a little far to travel but it's being done.
Good Luck
Good Luck
Thread
Thread Starter
Forum
Replies
Last Post
wagsrk08
Ignition/Tuner/ECM/Fuel Injection
0
May 15, 2009 02:22 PM
Jim Dawson
Ignition/Tuner/ECM/Fuel Injection
1
Sep 16, 2006 11:29 PM
Jim Dawson
General Harley Davidson Chat
0
Sep 15, 2006 03:34 PM
