Oil pump return fitting question
Thread Starter
|
Novice
Joined: Apr 2007
Posts: 24
Likes: 0
Oil pump return fitting question
I am putting together this custom and I moved the oil filter to the rear of the bike. Now I need an oil pump adapter that will route the return line backwards instead of foward to the stock location. Does any one make bolt on adapter to replace the stock lower oil pump casting? The stock one cannot be simply turned 180* becuase holes are offset. I really don't want to have a bunch of fittings put together to turn the hose around toward the rear, ANY HELP??? Motor is stock HD crate 80" evo- 1999. Thanks!
Road Master
Joined: May 2007
Posts: 953
Likes: 8
From: Central Oregon
since you can't rotate the fitting in the OEM pump you may need to upgrade to and S & S pump which should give you what you need.
http://www.jpcycles.com/productdetai...&page=&search=
http://www.jpcycles.com/productdetai...&page=&search=
Last edited by Rodney; Jan 31, 2009 at 04:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post
