When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just recorded my exhaust before and after I installed lollipops. The one thing I noticed when I played the recording on my TV, was the exhaust didn't sound as loud as it does live. I watched/ listened to the tape a few times and thought it sounded a lot quieter, so I went out and started the bike. It sounds a lot louder than the recording.
I was wondering if the owners that have posted their recordings think it sounds the same on the recording?
Thanks for the compliment.
Have you read the post by "pococj" in the top section of the exhaust forum. It is called Drag Pipe How-To.
Do you have flat spots or loss of power at lower RPMs from running no baffles? My Fat Boy SE was race tuned by the previous owner . There is no loss of power or flat spots from my lack of back pressure, from no baffles, that I can feel seat of pants wise.
My exhaust is very loud so I am trying to experiment using the Drag Pipe How-To post to see if I can knock a few decimals off the exhaust volume. I know that is not the intent of the post but, I figure by adding anything to alter/restrict the exhaust flow should quiet it just a bit. It will still be louder than the average HD with after market exhaust, but now it is way too loud
I fabbed and installed the lollipops yesterday. It is raining today so I can't take it for a test drive. I also ordered (2) copper 1- 1/2" to 1" pipe reducers from a plumber supply place yesterday. My biggest concern is my bike runs so good now that by adding these additional items it may hurt the performance. The fortunate thing is it doesn't cost hardly anything for these exhaust mods and if they don't work I can throw them away.
Tom
didnt see this but this is cross post from someone on here that is great sample of the Hooker Pipes on a Sportster (he has the stock vs hooker with quiet vs hooker with standard baffles)
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.