When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They at first thought it needed new rear wheel bearings, but under the last owner one bearing seemed to have locked up in the wheel and turned in the wheel ruining the fit of the bearing in the wheel. Instead of them replacing the wheel they just put a new bearing in. Its not extremely loose but it is loose in the wheel.
Originally Posted by s-glide76
Check your local Craigslist or eBay for a stock mag.
Any machine shop could most likely fix the bearing bore.
Well for starters I wouldn't be going back to that dealer again. Anybody who installs a bearing in a hub that allows the bearing to spin around isn't going to do that for me.
Well for starters I wouldn't be going back to that dealer again. Anybody who installs a bearing in a hub that allows the bearing to spin around isn't going to do that for me.
If I buy anything on line, especially anything of value, I call the company up. I write down the name of who I'm talking to and advise them that I am old and have nothing better to do than track them to the ends of the earth, and that even on my best day no one wants to deal with me. I tell them what application the item is for and make them tell me whether it will work or not. I tell them that if it don't work I'm gonna send it back at their expense or send my wife to where they are and have her kick their ***. By now I've eliminated most of the "sketchy" dealers and they've hung up. If they're still on the line I order and pay for with a credit card so I can stop payment on that. I do send a lot of **** back but I hound the company until they pay for return postage. My days are very full with non productive activities but I have found that is what it turns out I am actually best at. Also, I have always run at least one plug in a tire.
Ya just gotta like this guy! I don't know why but ya just gotta!
The dealer found the problem with my rear wheel when they went to change the tire last week. They would not let me ride the bike out of the dealer even if I wanted them to leave the original wheel on it.
The new wheel is half of an inch wider, so when the dealer measured the wheel off the rim that is where they got the quarter of an inch off. Anyway they put the new wheel and tire on the bike and got it back to me this afternoon. So I have my bike back and feel much better! They only charged me an hour labour total which they had more time in it then that, and picked the bike up at my house with their truck and trailer. So I feel like I got a fair deal in the end, there was just a lot of frustration mixed in!
If I buy anything on line, especially anything of value, I call the company up. I write down the name of who I'm talking to and advise them that I am old and have nothing better to do than track them to the ends of the earth, and that even on my best day no one wants to deal with me. I tell them what application the item is for and make them tell me whether it will work or not. I tell them that if it don't work I'm gonna send it back at their expense or send my wife to where they are and have her kick their ***. By now I've eliminated most of the "sketchy" dealers and they've hung up. If they're still on the line I order and pay for with a credit card so I can stop payment on that. I do send a lot of **** back but I hound the company until they pay for return postage. My days are very full with non productive activities but I have found that is what it turns out I am actually best at. Also, I have always run at least one plug in a tire.
Hell yes. Great post Sir. Similar tactics here...and will fine tune these tactics in 10 years when I retire and have more time.
Also, I have always run at least one plug in a tire.
I hear ya, man. The last time I put new tires on my bike I immediately jammed an ice pick in both of them just so I could get those first few plugs out of the way...
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.