Fog Light install
Thread Starter
|
Stage I
Joined: Apr 2020
Posts: 1
Likes: 0
From: Canada
Fog Light install
Hi, has anyone ever installed HD fog lights on a 2019 Ultra Limited? I bought a HD harness(part # 69201109) and can't figure out where to connect this to. I installed a with on the dash easily but the harness is causing me grief
thx.
thx.
Supporter
Joined: Jan 2007
Posts: 15,788
Likes: 5,625
From: along the shore of Mishigami
On my Road Glide there is a plugged off accy. connection. You could buy a "Y" adapter from HD, route the harness under the gas tank panel and plug into the single plug or if you bought the "Y" plug into it an you would still have an empty plug for the future.
Road Captain
Joined: Sep 2007
Posts: 626
Likes: 125
From: Reading, PA
This is my next project, I have the parts. The harness connects to a connector somewhere behind your auxiliary lamp assembly, you will have to take one side off to access the connector (#31) take that connector apart and plug one end of the harness in between the separated connector. The harness wiring runs down the down tube and you will connect the other end to the connectors that are attached to the wires from the fog lamps. Your fog lamps will go on and off with the auxiliary lamps using the switch that is on your left dash panel. I have a street glide so getting to connector 31 is different, but on your bike it should be somewhere behind the bracket that holds the auxiliary lamps and turn signals on your bike...………. I haven't done it except in my head
Thread
Thread Starter
Forum
Replies
Last Post
