FI Problem

Closed Thread Subscribe

Thread Tools

Search this Thread

Apr 23, 2006 | 10:38 PM

NJSUPERGLIDE

Thread Starter

Cruiser

Joined: Nov 2005

Posts: 122

Likes: 0

From: New Jerzee

FI Problem

Bike stalled out 3 times while riding. Completely dead no lights or gauges. Noticed when I moved around on the seat it would power back on.Removed the seat and found the plug for the ignition connection came loose. Plugged it back in and had all the power back but noticed the fuel injection light did not come on and the bike will not start. fuses all look ok. Fuel Pak lights up and has the right code in it. Is there some type of reset. Thanks for any help.

Frank

Apr 24, 2006 | 12:02 AM

Birddog415

Novice

Joined: Mar 2005

Posts: 19

Likes: 0

From:

RE: FI Problem

Yet another valid reason to have a carburetor. No wires needed to run it.

Apr 24, 2006 | 02:43 AM

mikeisglidn

Ultimate HDF Member

Joined: Feb 2005

Posts: 7,954

Likes: 9

From: jacksonville, nc

RE: FI Problem

Quote:

ORIGINAL: Birddog415

Yet another valid reason to have a carburetor. No wires needed to run it.

you got that schit right!!!!

Apr 24, 2006 | 09:43 AM

springer_

Road Captain

Joined: Sep 2005

Posts: 583

Likes: 5

From: Maine

RE: FI Problem

I thought you still needed spark plug wires? Maybe a couple more to make the coil work also? Wires to the crank sensor? Sounds like you could have a couple to recharge the battery that runs all that other stuff too?

No wires to run a carb hmmmmmm

Apr 25, 2006 | 12:43 AM

anniv03classic

Tourer

Joined: Oct 2005

Posts: 480

Likes: 0

From: Schaumburg, IL

RE: FI Problem

All the jokes you don't need. Might have pulled a wire loose in one of the connectors when the connectors got un-plugged. Might be a bad crimp on one of the pins in a connector.