what bike will this transmission fit?
Seasoned HDF Member
Joined: Sep 2008
Posts: 46,845
Likes: 22,534
From: Land of the Free, Home of Jack Daniel's
Ultimate HDF Member
Joined: Dec 2007
Posts: 8,642
Likes: 6
From: Forest Lake, Mn
Uhhhh, try 90-94 FXR, as posted.
Delkron makes the 'case', and the 'guts', are USUALLY jus' stock Harley, UNLESS someone bought a set of Andrews, etc, gears 'n guts to stuff in it.
The case will sell for about $200, or so, BARE. Upwards of $350 or more, with bearings, etc, BUT, NO gears.
Lot of 'variables' when you start dealling with the 'newer' trannys, Andrews gears, Baker gears, etc, so 'price' is likewise, very 'variable'.
IF you are jus' looking to 'dump' it, check EBAY, and then price accordingly.
IF you want MAX $$$, then start digging into it a bit, so you can 'specify' to the purchaser, what you have.
I'm NOT venturing a 'guess', cause I don't know, what you 'actually' have in there, either. AND I'd hate like H*LL to tell you "X", when you really have an "XYZ+" tranny.
Delkron makes the 'case', and the 'guts', are USUALLY jus' stock Harley, UNLESS someone bought a set of Andrews, etc, gears 'n guts to stuff in it.
The case will sell for about $200, or so, BARE. Upwards of $350 or more, with bearings, etc, BUT, NO gears.
Lot of 'variables' when you start dealling with the 'newer' trannys, Andrews gears, Baker gears, etc, so 'price' is likewise, very 'variable'.
IF you are jus' looking to 'dump' it, check EBAY, and then price accordingly.
IF you want MAX $$$, then start digging into it a bit, so you can 'specify' to the purchaser, what you have.
I'm NOT venturing a 'guess', cause I don't know, what you 'actually' have in there, either. AND I'd hate like H*LL to tell you "X", when you really have an "XYZ+" tranny.
Banned
Joined: Jul 2009
Posts: 3,719
Likes: 1
Bring that tranny and ANY bike you want to put it on, down to my place and we'll get 'er done! A couple of grinders, welder, cuttin torch, large hammer, and big *** shoe horn in the hands of a well seasoned shade tree mechanic can make anything fit anything. 
Yer prolly an entrepreneur lookin to sell it to some one else tho, so I'd have to agree with the majority...
Yer prolly an entrepreneur lookin to sell it to some one else tho, so I'd have to agree with the majority...
Cruiser
Joined: Sep 2009
Posts: 120
Likes: 0
The tranny case is for a FXR and maybe a older FLH. It has the mount on the end where the swingarm piviot shaft goes thru and also has the bolt hole for a oil filter mount. Hard to say how much the whole thing is worth without seeing what kind of shape the gears and shafts are in .The case alone is worth about $200. If you have all the gears and shafts to build it it , and there in good shape it should be worth about $500. If you assemble it you should get between $800 and $1,000 for it. The case would be good to put a 6 speed gearset in. The kickstand looks to be for a softail so sell that by itself
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
5th Gear
Joined: Jan 2010
Posts: 9
Likes: 0
The tranny case is for a FXR and maybe a older FLH. It has the mount on the end where the swingarm piviot shaft goes thru and also has the bolt hole for a oil filter mount. Hard to say how much the whole thing is worth without seeing what kind of shape the gears and shafts are in .The case alone is worth about $200. If you have all the gears and shafts to build it it , and there in good shape it should be worth about $500. If you assemble it you should get between $800 and $1,000 for it. The case would be good to put a 6 speed gearset in. The kickstand looks to be for a softail so sell that by itself
Sorry for all these questions I acquired these transmissions on a trade. I don't even own a bike
. Is there anyone on here interested in them?
Thanks Guys!
Ultimate HDF Member
Joined: Dec 2007
Posts: 8,642
Likes: 6
From: Forest Lake, Mn
The one is a complete transmission and the other is just a case. If I can get $800 to $1000 for the assembled one and $200 for the bare case...then $700 should be a pretty good price? The gears all look good. If anyone needs to see a close up pic of them let me know.
Sorry for all these questions I acquired these transmissions on a trade. I don't even own a bike.
Is there anyone on here interested in them?
Thanks Guys!
Sorry for all these questions I acquired these transmissions on a trade. I don't even own a bike
. Is there anyone on here interested in them?
Thanks Guys!
Someone earlier in this thread 'showed' some interest. Click on the name, and it will let you send 'em a PM(Private Message).