When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I really like my cowboy boots for warm weather riding so I took them up to the local shoe repair shop and had them replace the soles with good traction soles and then applied a heavy coat of Redwing Boot Oil to the leather. They feel great, have good traction and are completely waterproof.
That's what I did.
Had the cobbler put a work sole on an old pair of Justins that needed resoling. Then I just oiled them. Works like a charm.
The trick is to re-oil them once or twice a year. That's OK for me. I also have a couple of Filson coats that I have to re-wax about that often, so I just make it a "work party."
Love my Cruiserworks. Waterproof and I forget I have them on and when I called to order one of the OWNERS answered the phone and helped with sizing. Awesome! Awesome! Awesome!
I am considering the Sidi Sport Rain, Ariat Men's Carbide H20 Motorcycle Boot or the Harley Waterproof boots. Anybody have any comments on these? Thanks.
I bought the Ariat Carbide H20 boots today and give them a big thumbs up. I usually try to avoid Chinese made boots, but when I tried these on at the store they fit like a glove and and were by far the most comfortable waterproof boots I tried on. I rode about 60 miles with them and they feel very supportive and sturdy. Not bad looking either.
Love my Cruiserworks. Waterproof and I forget I have them on and when I called to order one of the OWNERS answered the phone and helped with sizing. Awesome! Awesome! Awesome!
+1 on Cruiserworks I have Two pairs the short and long love them both, have not bought from the new owners but have had both pairs resoled.
Matterhorn: 10" high, goretex bootie, thinsulate lined, lace to toe. water resistant boot, waterproof integral bootie vibram sole. Keeps you warm and toastie and dry. Plus you can RUN in them. Mine are 15+ years old and still going well. Been on plenty of field exercises and deployments as well as lots of miles on a bike. $200.00 or so, but dry feet are worth it.
I only wear steel toe redwings. They are completely waterproof as long as you dont stand in water that goes up into the laces. I drill and service water wells and often stand in a couple inches of water for long periods of time. Im super hard on boots and they last me over a year (only waterproof for the first 9 months or so).
Theyre high dollar but theyre the only work boot that is really comfortable for 12-14 hours a day sometimes.
Would not suggest steel toes strictly for riding though as the toes get pretty cold.
Cruiseworks and agree with the others. I had a problem with the soles cracking which caused them to leak. Sent them back and they put new soles on them at no cost to me. Would buy them again!
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.