When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Funny you bring this up, i work for the county, we just finished doing our crack sealing, we use a wand with a hockey puck type attachment on the end. You slide it over the crack, and pull the trigger, it dispenses the hot tar into and over the crack., as you walk along. I noticed this year that our tar snakes are thicker than normal. So, no doubt, watch out, those suckers are slick, even when dry. I just rode over one of the roads we did , and it's almost like riding on a bridge with expanded metal on the decking.
I've always hear this but never paid much attention as I had never had an issue with them...until I took a trip to Arkansas. On teh highway just west of Eureka Springs they are there and I swear I was riding on ires that had 5lbs of air pressure. It was the most unnatural feeling I've ever had on a motorcycle.
Plenty of new riders here that might not know about tar strips, lubricants, gravel, paint, and general common super slick owl ****. Some of the older riders might need a reminder.
Funny you bring this up, i work for the county, we just finished doing our crack sealing, we use a wand with a hockey puck type attachment on the end. You slide it over the crack, and pull the trigger, it dispenses the hot tar into and over the crack., as you walk along. I noticed this year that our tar snakes are thicker than normal. So, no doubt, watch out, those suckers are slick, even when dry. I just rode over one of the roads we did , and it's almost like riding on a bridge with expanded metal on the decking.
Me too. at least we got to chip seal over ours though.
I've read about them here and try to be aware of them. I experienced a little soft spot today in a turn from one street to another. Nothing major, just a little "hello" from a tar snake that has been baking in the sun.
Last year my bike was new and I rode out to the wet coast with a friend. We spent a couple of days in the rain, through the mountains on lots of twisties with plenty of tar snakes. My front end was slipping out so bad, I was convinced it was the tire.
What's that?
Slow down?
Yeah, I would slow down until the pucker passed and then pick it up again..
I've always hear this but never paid much attention as I had never had an issue with them...until I took a trip to Arkansas. On teh highway just west of Eureka Springs they are there and I swear I was riding on ires that had 5lbs of air pressure. It was the most unnatural feeling I've ever had on a motorcycle.
Be careful out there. Thanks for the post.
I believe the wife and I was on that same stretch a couple months ago you're speaking of. I was puckering but more concerned about the wife on her own ride directly behind me. When we got to Eureka Springs I mentioned it to her. She said she seen/felt them and tried to ride approperately.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.