Help Please
Thread Starter
|
Stage II
Joined: Jun 2017
Posts: 2
Likes: 0
From: oswego, il
Help Please
Hi, I'm new to the HD forum and I need some help/advice.
I have a 2008 Road King that just started acting up by not starting. When I turn the ignition on I do NOT hear the fuel pump being activated. I ran a diagnostic and this is what showed up:
P:
P1003 System Relay Contacts Open
P1511 EFI Power Management Mode
P2102 EFI Motor Circuit Range Performance (Actuation Error)
S:
U1016 Loss of ECM ......
Sp and T listed NONE.
I checked the fuses and all were good.
Any suggestions as to what I should do before calling the dealership and having them pick up the bike and work on it at their shop?
Thanks for any help you can provide.
Dave
I have a 2008 Road King that just started acting up by not starting. When I turn the ignition on I do NOT hear the fuel pump being activated. I ran a diagnostic and this is what showed up:
P:
P1003 System Relay Contacts Open
P1511 EFI Power Management Mode
P2102 EFI Motor Circuit Range Performance (Actuation Error)
S:
U1016 Loss of ECM ......
Sp and T listed NONE.
I checked the fuses and all were good.
Any suggestions as to what I should do before calling the dealership and having them pick up the bike and work on it at their shop?
Thanks for any help you can provide.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
