Stalling while riding
Thread Starter
|
3rd Gear
Joined: Jul 2017
Posts: 7
Likes: 0
From: Windsor ontario cansda
Damn bro just like that? Well I hope that they figure it out and your back on the road. I'm sure it will be a quick fix and they will take care of you. But while your down there, order a service manual even if your not mechanical. There is a lot of valuable info and you can learn to diagnose and do things on your own, even if it's not on your own you can keep the dealership honest with more knowledge you retain.
also please do post on here when you get the bike back, I'm really interested in finding out what's wrong.
good luck Dr flash
also please do post on here when you get the bike back, I'm really interested in finding out what's wrong.
good luck Dr flash
Thread Starter
|
3rd Gear
Joined: Jul 2017
Posts: 7
Likes: 0
From: Windsor ontario cansda
its was a short in my wiring. My springer front end was pinching the wires at my neck that was loosened when i had my head gasket changed. Killswitch, startswitch and ground were crushed. When bike was hot it would short the killswitch stalling the bike. Once it was cooled it would start.
Thread
Thread Starter
Forum
Replies
Last Post
Susan Nashbliss
General Harley Davidson Chat
5
Feb 14, 2017 10:35 AM
cooldriver
General Harley Davidson Chat
8
Feb 14, 2015 07:06 AM
