Starting a project
Thread Starter
|
Road Master
Joined: Dec 2010
Posts: 987
Likes: 31
Starting a project
The long version is in the thread in my sig...
The short version - I'm looking for a restore project that's not to much for a teenage son and his dad (that's me) to handle. We have maintained and done minor work on our dirt bikes, so a total rebuild is out of the option.
Suggestions?
The short version - I'm looking for a restore project that's not to much for a teenage son and his dad (that's me) to handle. We have maintained and done minor work on our dirt bikes, so a total rebuild is out of the option.
Suggestions?
Tourer
Joined: Jan 2008
Posts: 314
Likes: 5
From: Albany Oregon
I do not know where you are located but out here in Or there are plenty of sportys for around 3500. If its a project then why does it need to be a 1200? The 883 is usually 20-35% lower in price. If you want older I have seen several Iron head (pre 86) Sportsters for under 3 grand even as low as 1500 sometimes.
Thread Starter
|
Road Master
Joined: Dec 2010
Posts: 987
Likes: 31
I do not know where you are located but out here in Or there are plenty of sportys for around 3500. If its a project then why does it need to be a 1200? The 883 is usually 20-35% lower in price. If you want older I have seen several Iron head (pre 86) Sportsters for under 3 grand even as low as 1500 sometimes.
a 1200 sporty or dyna or FXR for me to ride now (98/99 FXR, or 06-newer Dyna, or 03-newer sporty)
an older rebuildable or almost-restored bike for my son's senior project. (cheap is important)
Thread
Thread Starter
Forum
Replies
Last Post
