General Topics/Tech Tips Discussion on break in periods, rider comfort, seats and pad suggestions. Tech tips as they become available will be posted here.

Help: problems after installing grips

Thread Tools
 
Search this Thread
 
Old Jun 19, 2014 | 10:12 PM
  #1  
pplschamp81's Avatar
pplschamp81
Thread Starter
|
1st Gear
Joined: May 2014
Posts: 5
Likes: 0
From: Ohio
Default Help: problems after installing grips

Installed new avon grips on my 13 flhx. I felt like I was real careful doing so but as I was coming into work tonight I noticed both turn signals, cruise, and brake light doesn't work. Cruise light is off on dash as well. Would those issues just be a fuse?

Also, as I was pulling in the parking lot my engine light came on. Bike has 2300 miles on it.

Any opinions/info is appreciated.
Thanks
ER
 
Reply
Old Jun 20, 2014 | 03:03 PM
  #2  
Spartanden's Avatar
Spartanden
Seasoned HDF Member
Veteran: Army
15 Year Member
Liked
Community Favorite
Joined: Apr 2008
Posts: 23,399
Likes: 8,509
From: Spartan Country, Michigan
Default

pinched wire.... if you removed the switch housings (and we know you did!!) you have a pinched wire that has shorted somewhere. remove the housings and look for pinched wire. then carefully reinstall them
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
VAgorilla
Electrical/Lighting/Alarm
3
Nov 21, 2017 06:25 AM
Old Road Toad
Touring Models
4
Nov 16, 2017 10:55 AM
streetbobkid
Dyna Glide Models
13
Apr 10, 2010 09:29 PM
maddoggreene
Dyna Glide Models
7
Jan 31, 2008 06:53 PM
upnorthbiker
Dyna Glide Models
12
Nov 11, 2007 05:22 PM




All times are GMT -5. The time now is 08:13 PM.