drag pipes on ironhead
Thread Starter
|
2nd Gear
Joined: Jan 2013
Posts: 6
Likes: 0
From: chillicothe mo
drag pipes on ironhead
i noticed my drag pipes on my ironhead got louder while riding when home i found i had lost a baffel out of 1 of my pipes so should i do a lolli pop for that pipe or for both and if i just go strait pipe how lean or rich should i go with the carb this bike has seen many hands but its still fun and loud
Best to do lollipops in both.
Lots of opinions around how exhaust systems work so i do not pay much attention to them. The need for back pressure seems to be real. I believe both should be the same. With no baffles you will lose power around 3000-4000 RPM.
Lots of opinions around how exhaust systems work so i do not pay much attention to them. The need for back pressure seems to be real. I believe both should be the same. With no baffles you will lose power around 3000-4000 RPM.
Tourer
Joined: Sep 2007
Posts: 400
Likes: 1
From: se ohio
my motor is not near stock, with 2 in pipes i have tried baffles, loli pops only seems to loose a little torqe down low in the rpm range this thing is a animal from about 2500 and up have yet to be aout ran up till i run out of gear lol i like the sound of the open 2 in pipes! if you liked the bafles try the loli pops and see what you think at least you can turn and adjust them somewhat
Thread
Thread Starter
Forum
Replies
Last Post
