Danmoto 2-1-2 headers!!!
Thread Starter
|
Advanced
Joined: Mar 2010
Posts: 69
Likes: 1
Danmoto 2-1-2 headers!!!
Does these fit 110 engines? CVO RG 2009
Pretty cheap and looks very good guality!
https://www.dan-moto.com/DM_INT/inde...71r4sr839t0113
Pretty cheap and looks very good guality!
https://www.dan-moto.com/DM_INT/inde...71r4sr839t0113
Grand HDF Member
Joined: Oct 2009
Posts: 3,932
Likes: 882
From: SOON TO BE A SAFE AMERICA
Does these fit 110 engines? CVO RG 2009
Pretty cheap and looks very good guality!
https://www.dan-moto.com/DM_INT/inde...71r4sr839t0113
Pretty cheap and looks very good guality!
https://www.dan-moto.com/DM_INT/inde...71r4sr839t0113
The very best advise I can give you is CVOHarley site!
As for the header shown, I have no knowledge or ever heard of them. One of the best proven set ups for the CVO's is Fullsac or Fuelmoto.
I'm a big fan of the TTS Mastertune Turner and Fullsac.
Again, enjoy your new hot road Bagger!
YB
EDIT: just came back and looked at the danmoto, it's for a 2010+ model year bike. 2009 model year have a larger bung plug and is located closer to the heads as opposed to lower near the collector.
IF I WERE IN YOUR SHOES, I would check out the Fullsac "D" Head pipe, TTS Master tune Turner and ride with your current pipes. Fullsac will sent you a proven dynoed map that will get you very close to 90-99.9% as close as you can to getting all the power from your 110" motor.
Last edited by 09 YELLOWBIRD; Aug 8, 2014 at 07:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
