Dyna Footboards.......Review and Pix's

Reply Subscribe

Thread Tools

Search this Thread

Aug 23, 2017 | 06:56 AM

#61

chasenfins

Advanced

Joined: Aug 2015

Posts: 89

Likes: 3

From: Leland, NC

Quote:

Originally Posted by TailGunny

hey all so I'm looking to add the V-Twin Manufacturing FXD Floorboard Kit to my 03 fxd but I want to know will I need to relocate my shift shaft? I currently have forward controls on the bike thanks

I didn't have to, I already had forward controls so just mounted the floorboards and away I went. 20-30 minutes tops...

Aug 23, 2017 | 11:20 AM

#62

Biggzie

Cruiser

Joined: Apr 2015

Posts: 136

Likes: 20

From: High mountain, Colorado

Quote:

Originally Posted by TailGunny

hey all so I'm looking to add the V-Twin Manufacturing FXD Floorboard Kit to my 03 fxd but I want to know will I need to relocate my shift shaft? I currently have forward controls on the bike thanks

Hello TailGunny,
I believe that You can get shifter shaft cover (HD #34640-93) and a primary shifter lever retainer bracket (HD #34639-01). I ordered mine from boardtracker Harley Davidson in Wisconsin for 21 dollars for both i believe.

I ordered the Harley footboard kit (HD #50500247) and the shift cover and bracket all together.

\

Good luck to you.
Chris

Aug 23, 2017 | 12:01 PM

#63

FXD2003Rider

Administrator Emeritus

Joined: Feb 2007

Posts: 9,192

Likes: 965

From: Harmelen (The Netherlands, Europe)

Some links to relevant info:

Instruction Sheet -J01921

Instruction Sheet -J02241

Instruction Sheet J05615

Aug 24, 2017 | 01:56 PM

#64

Dan28

Road Master

Joined: Jul 2008

Posts: 1,227

Likes: 210

From: St. Louis, MO

Quote:

Originally Posted by chasenfins

I didn't have to, I already had forward controls so just mounted the floorboards and away I went. 20-30 minutes tops...

Think I have the "mini" version of yours I've had them on two different Wide Glides. The footboard on the exhaust side of my current Wide Glide is about to wear through the outside rear corner from dragging when cornering. The other side is close too. Though they are relatively new in the pic below. For a long time I would put skateboard grip tape on the rubber surface.

Last edited by Dan28; Aug 24, 2017 at 02:02 PM.

Aug 29, 2017 | 05:03 PM

#65

gmkracing

Stage III

Joined: Aug 2017

Posts: 3

Likes: 0

From: sweden

clutch

Hi read in a old thread that you converted cable to hydraulic clutch.
Can you let me know wher to look for these parts.

I have a Softtail night train 2006 FXSTBI, and wnt to convert to hydraulic clutch
with black transmission cover and black clutch master cylinder

many thanks

Magnus from sweden

Aug 29, 2017 | 05:06 PM

#66

gmkracing

Stage III

Joined: Aug 2017

Posts: 3

Likes: 0

From: sweden

Hi read in a old thread that you converted cable to hydraulic clutch.
Can you let me know wher to look for these parts.

question to puttnutt24
I have a Softtail night train 2006 FXSTBI, and wnt to convert to hydraulic clutch
with black transmission cover and black clutch master cylinder

many thanks

Magnus from sweden