When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
yah ,eharlyparts.com is where i found the belt guard decal sticker, but 200 $ is a little steep ! i found a seller on eBay who engraves point covers but would not replicate an FXDG point cover for me because of copy right laws, may be you could give me your contact for the point cover? thats the first real close up of the original point cover that I've seen, thanks for sharing...by the photos i see that you have the H-D electronic ignition i converted mein back to points to points to avoid the cost of replacing the ignition black box, when i powder coated my frame i removed the mounting plate, looks a lot cleaner, was able to replace the carb with a non vacuum one to get rid of the V.O.E.S. switch for the vacuum advance
Last edited by troy montoya; Feb 18, 2018 at 10:16 PM.
Hi shovhd, yes that is a wrinkle Finnish paint, it was done by a shop heir in Germany , i think it came out quite well, cant wait to see the completed motor , i am going to try some time this week to swing by the shop thats building my engine so i can take some more photos as the motor gets put together
rear rocker box with wrinkle paint, i think they did really good job !!!
Don't forget to polish up those fin tips! Some spots on certain fins weren't polished, so pay attention to detail.
hi Mr Lexus , how much do you want for the engraved point cover ? or have you already made a deal with shovhd ? the one you made looks excellent you could send me a private message if you like
Last edited by troy montoya; Feb 20, 2018 at 09:35 AM.
hi Mr Lexus , how much do you want for the engraved point cover ? or have you already made a deal with shovhd ? the one you made looks excellent you could send me a private message if you like
have tried several times to send a private message asking for postage costs , not sure if you got the messages ,if so pardon the repeat messages if not please let me know if you sent the point cover with postage costs, thanks Troy
hi folks heirs a photo of my motor going back together heads were out getting new valve seats put in , i think the motor should be done in a week or 2
motor coming together , putting in a metal breather, oil pump had some issues , will put on a new one...
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
