When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am in the process of installing new brake rotors on my 2010 Street Glide. Im changing the stock rotors out for Harley floating rotors. First question is it doesnt seem as though there is a special left and right rotor with the floaters? both same part number and no directional arrows either? 2nd question is that there is an engraved slot mark on one of the rotor bolt holes as if ti indicate this bolt hole should be lined up in a special place? any insight would be appreciated. Thanks
If they look like this I too wondered that and came to the conclusion that there is no left/right and the mark in that one bolt hole means nothing for installation. However, I was going to be sure to line up that mark to be the same on each side just in case.
I've used H-D floating rotors, of a different style, for some years now, but haven't had any problems with them. They can only go on one way round, due to the screw recesses. I've recently used EBC floating rotors and they fit in exactly the same way - the only way possible!
If they look like this I too wondered that and came to the conclusion that there is no left/right and the mark in that one bolt hole means nothing for installation. However, I was going to be sure to line up that mark to be the same on each side just in case.
Thanks, I did the same thing. I lined up the marks so they matched from side to side. Thanks again!
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
brake rotor help please
