cannot recognize HD detail from the pic
Thread Starter
|
Stage III
Joined: Jan 2015
Posts: 3
Likes: 0
From: Riga
cannot recognize HD detail from the pic
I am reposting my post about part of motorcycle I cannot recognize on the pic.
it is from FLSTC 2000`
I kindly ask for your advice
original link
it is from FLSTC 2000`
I kindly ask for your advice
original link
Road Master
Joined: Aug 2011
Posts: 1,195
Likes: 299
From: midwest
I've been studying on that thing from every angle, and recognize nothing. Maybe there's a location clue in other pix they sent?
Be careful - if there's any uncertainty contact the seller, and if you don't trust what you're hearing just step away. Luck.
Be careful - if there's any uncertainty contact the seller, and if you don't trust what you're hearing just step away. Luck.
Stellar HDF Member
Joined: Oct 2009
Posts: 2,054
Likes: 26
From: Florida
I am reposting my post about part of motorcycle I cannot recognize on the pic.
it is from FLSTC 2000`
I kindly ask for your advice
original link
it is from FLSTC 2000`
I kindly ask for your advice
original link
I am going to guess that the photo is posted sideways.
To me it looks like the front most portion of the frame that just in front of the tank and where the neck of the motorcycle is. If this is correct, the blank rectangular area looks like the spot where the VIN number would be. Given that there are three holes there it looks like the VIN used to be on a plate and was removed. I am not too familiar with Harley's from this year. My Harley and every other I've seen has the VIN number stamped directly into the metal.
The hole directly above it in the photo looks like where a steering lock should be.
Good luck with this purchase. I understand that you are buying from an insurance auction so I'm hoping you don't get take advantage of.
Skeez
Thread
Thread Starter
Forum
Replies
Last Post
Half-Fast Deuce
Softail Models
4
Feb 21, 2013 08:15 PM
