Breakout, stock bar pullback
Thread Starter
|
6th Gear
Joined: Jul 2017
Posts: 12
Likes: 1
From: Moscow
Breakout, stock bar pullback
No-no, no unique questions about "what is the replacement". I've searched the forum but failed to find original pullback figure for the bike, only the list of specs for the ones produced in 2013 and earlier.
Is it 4-5"? Why asking - need just about an inch of improvement (sounds aweful
) and looking for a bar "stock +1". But what is the stock?
Is it 4-5"? Why asking - need just about an inch of improvement (sounds aweful
) and looking for a bar "stock +1". But what is the stock?
Road Captain
Joined: May 2017
Posts: 563
Likes: 135
From: Indian Creek Village Florida
Fatbob bar is perfect for you 
a friend of ours installed Fat Bob bar on his Harley Breakout it gave him 1" to 2" reach ... this will be my next mod - after installing air suspension it pushed me back 1 inch so i need to install Fat Bob bar to get that 1 inch back.
a friend of ours installed Fat Bob bar on his Harley Breakout it gave him 1" to 2" reach ... this will be my next mod - after installing air suspension it pushed me back 1 inch so i need to install Fat Bob bar to get that 1 inch back.
Last edited by Jessica Sinclair; Jul 26, 2017 at 04:35 AM.
Seasoned HDF Member
Joined: Sep 2013
Posts: 6,175
Likes: 1,966
From: Great State of Canada
Sounds like you could install 10 degree angled bushings under your risers.
https://www.denniskirk.com/la-choppe...prd/598833.sku
With your "B" engine you won't find vibration an issue. I have a set of these installed and they look and function great,, "easy solution".
https://www.denniskirk.com/la-choppe...prd/598833.sku
With your "B" engine you won't find vibration an issue. I have a set of these installed and they look and function great,, "easy solution".
Thread Starter
|
6th Gear
Joined: Jul 2017
Posts: 12
Likes: 1
From: Moscow
Fatbob bar is perfect for you a friend of ours installed Fat Bob bar on his Harley Breakout it gave him 1" to 2" reach ... this will be my next mod - after installing air suspension it pushed me back 1 inch so i need to install Fat Bob bar to get that 1 inch back.
a friend of ours installed Fat Bob bar on his Harley Breakout it gave him 1" to 2" reach ... this will be my next mod - after installing air suspension it pushed me back 1 inch so i need to install Fat Bob bar to get that 1 inch back.What I am thinking is - W0511 from Chubbys is no different from BO stock?
Thread Starter
|
6th Gear
Joined: Jul 2017
Posts: 12
Likes: 1
From: Moscow
Sounds like you could install 10 degree angled bushings under your risers.
https://www.denniskirk.com/la-choppe...prd/598833.sku
With your "B" engine you won't find vibration an issue. I have a set of these installed and they look and function great,, "easy solution".
https://www.denniskirk.com/la-choppe...prd/598833.sku
With your "B" engine you won't find vibration an issue. I have a set of these installed and they look and function great,, "easy solution".
Thread
Thread Starter
Forum
Replies
Last Post
Maximus Brutus
Dyna Glide Models
0
Apr 23, 2009 05:54 AM
leeinmemphis
Dyna Glide Models
2
Feb 9, 2009 08:11 AM
