Power Commander maps...
Thread Starter
|
Road Master
Joined: Jun 2007
Posts: 852
Likes: 3
Power Commander maps...
04' duece with a K&N 3909 Filter kit. Thinking of purchasing the PCIII. Looking at their map database, most maps refer using the SE air filter. would I really need a specific map for the K&N?
Also, where is the best site for purchasing the SERT?
ronyd
Also, where is the best site for purchasing the SERT?
ronyd
Tourer
Joined: Nov 2005
Posts: 360
Likes: 0
From: Louisville, KY
RE: Power Commander maps...
Nope....a high performance air filter is a high performance air filter. Just use the map that says SE filter or any other high performance filter. Same goes for pipes...you don't have to try to find the map with the exact brand and model of pipes. You have to look at the type of pipes you have and the length of the pipe.
So if you have a 2 into 1 pipe try to find a map with another 2 into 1 pipe. If you have a 2 into 2 Pipe like V&H longshots look for a 2 into 2 pipe about the same length.
No two bikes are alike so it may take a few maps before you find one that works.
So if you have a 2 into 1 pipe try to find a map with another 2 into 1 pipe. If you have a 2 into 2 Pipe like V&H longshots look for a 2 into 2 pipe about the same length.
No two bikes are alike so it may take a few maps before you find one that works.
Thread
Thread Starter
Forum
Replies
Last Post
raaaaaa
Softail Models
4
Aug 24, 2009 03:29 PM
raaaaaa
Ignition/Tuner/ECM/Fuel Injection
2
Aug 24, 2009 01:33 PM
