Front fender
Road Master
Joined: Apr 2008
Posts: 921
Likes: 22
From: Houston, TX
Here's a good place for good fenders that aren't priced way high..
http://www.russwernimont.com/store/index.php?cPath=1
http://www.russwernimont.com/store/index.php?cPath=1
Seasoned HDF Member
Joined: Nov 2007
Posts: 6,790
Likes: 10
From: Hawaii
Yes I am 1" spacers on each side my fender is 5" wide... From a local hardware store $4.00 dollars each Chrome.
Seasoned HDF Member
Joined: Nov 2007
Posts: 6,790
Likes: 10
From: Hawaii
My fender came un drilled raw... That the only way you'll get the look you're looking for. It can be spooky when you drill it, thinking you may ruin it... But as long as you measure like five time... and then measure again you can do it. You can get a longboy fender on ebay for under $150 easy and if you're gonna run a 90/90 I would say a 4.75" would be good.
Sorry about the crapy pic but the sun was in my face.
Sorry about the crapy pic but the sun was in my face.
Last edited by story808; Feb 21, 2009 at 02:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bikerguy76
Sportster Models
0
Sep 20, 2010 11:20 AM
