Braided EFI Line?
Thread Starter
|
Advanced
Joined: Jan 2009
Posts: 94
Likes: 44
From: Murfreesboro, TN
Braided EFI Line?
Does anyone make a steel braided EFI line for late model softails (especially the Rocker)? I purchased the braided 04-05 DYNA line but it was too short. I'd really like to get a silver braided line to match the rest of the bike.
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 35
From: Rochester, NY
I have seen braided tank crossover lines, but nothing for the pressurized injector line.
But you could get some braided sleeving and use it to cover the stock line.
If you do you could put somethng like ythis on the end to cover the end of the braid.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Then use some shrink tube on the end that can't be seen behind the AC plate.
But you could get some braided sleeving and use it to cover the stock line.
If you do you could put somethng like ythis on the end to cover the end of the braid.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
Then use some shrink tube on the end that can't be seen behind the AC plate.
Last edited by In Memoriam Citoriplus; May 29, 2009 at 07:51 AM.
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 35
From: Rochester, NY
Thanks for the idea. I'm going to have to look into that seeing as I already have some of the stuff laying around.
If I can remember where I stashed it that is.
Thread
Thread Starter
Forum
Replies
Last Post
