well here it is,but first bigs tks to dusty2221 and tx outlaw and citori for the tips and comments that helped me out.as you can see in the pics i took the seat post and cut off the bracket that had the 3 bolt holes(2 for the coil and 1 for the cover),then i welded that narrow strip of steel to the horn cover bracket which i also cut. then a small black paint job with a rattle can of black on the bracket and it was done.ordered plug wires from USKOOLINES and here we are.now the other posts on this in here were on earlier models but HD changed the coil shape in 2007 and it WONT fit in the horn cover so thats why i just used the stock coil cover as seen in the pics.if anyone has questions about this feel free to pm me and i will help out as much as possible

 

Nice. Where did your horn go?

 

LOL, I was just thinking the same thing.

MikeM

 

Looks Great!
Top Notch Job....
I like the way it cleans up the area between the rear cylinder and oil tank...

CC

 

i have a horn but never use it..............in MN its against the law to honk your horn anyway.............unless its an emergency............pfffft................i gotta do that mod this winter looks good mang

 

This is something I really want to do, but I have to be able to keep a full-power horn. The DC Beltway requires a horn.

 

I need a horn too. I couldn't imagine not having one. How else would I be able to get my riding buddies on their bikes?

 

i jus start it rev it twice and say lets go fvck sticks

 

"Are we gonna ride or are we gonna d*ck around?"

 

I moved my coil to the same spot and put my horn behind the splash gaurd in front of the rear tire