crossbones
Thread Starter
|
Road Master
Joined: May 2010
Posts: 762
Likes: 1
From: mission bc canada
ok heres what i did
on the older controls the clutch side signal has a bracket that isnt on the right side.you will need 2 of these HD part#67829-88
to relocate install a stud in the upper or lower triple tree pinch bolt long enough to add a spacer to bring it out flush and it cant crush went torqued then add signal bracket and an acorn or similar to hold in place..now just screw on the signal and its done..i did it on my new springer same thing different bolts..on the right side the control cables go through a wire keeper that is the bolt hole to use and on the left side its justa bolt to plug the hole ..took about an hour start to finish..since these pics were taken i got a set of chrome swivels for my birthday so now they are chrome but the stock ones i painted black and they couldnt be seen looked great..
its actually the AC that came on my bike factory..but yes its just like an evo cover except the evo cover has a knotch in the bottom to clear the carb or intake.?
i put one on my nightster before i sold it.
Last edited by colonelangus1; Jul 2, 2010 at 12:14 PM.
Cruiser
Joined: Mar 2009
Posts: 108
Likes: 0
hey unimog!! beware of what you are doing. your windshield ain't gonna fit back on if you do that.
just sayin'......
i'm getting ready to slap a set of 18" apes on and i have yet to solve the problem of turn signal relocation. May end up just fabbing my own mounting hardware and getting a set of rear signals (or aftermarket) to run the wiring through the base, instead of out of the side of the housing. or...maybe i'll just ditch them altogether.
just sayin'......
i'm getting ready to slap a set of 18" apes on and i have yet to solve the problem of turn signal relocation. May end up just fabbing my own mounting hardware and getting a set of rear signals (or aftermarket) to run the wiring through the base, instead of out of the side of the housing. or...maybe i'll just ditch them altogether.
Intermediate
Joined: Feb 2010
Posts: 42
Likes: 0
From: Chesterville, OH
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Road Master
Joined: May 2010
Posts: 762
Likes: 1
From: mission bc canada
ordered more stuff
thanks for all the kind words guys ..
purchased a bobtail fender rack from skeezmachine today so i ordered the harley messanger sissybar bag and the auxillary signal light kit so the signals are runners and brake light as well.
heres a few links to HD and the items i ordered the fender rack link is for reference..
http://www.harley-davidson.com/gma/g...bmLocale=en_US
http://www.harley-davidson.com/gma/g...bmLocale=en_US
http://www.harley-davidson.com/gma/g...bmLocale=en_US
