I can't activate mine Security kit anymore. I all ready replaced the battery of the keyfob. Do you know what the problem can be.

 

Could be the TSSM (turn signal security module). Check your fuses first. And are you sure the new battery is good and seated properly in the fob?

Drew

 

did you reprogram the fob after you replaced the battery?

 

I didn't reprogram the fob. The battery is correct. I wil check the fuse tomorrow. Time difference. I live in the Netherlands. Home of hookers and drugs LOL.

 

Well there's your problem you need to stick your finger in it ....LOL

 

==========================================

din't do anything to mine cept put in the new battery....
din't know U had to repro...

course it wasn't dead prior...

 

I not reprogram mine either, but it would be the next logical step. It takes about 3 minutes to program. I would also take the fob into an auto parts store that has one of those displays that checks your fobs battery, to see if it is working or not.
If you eliminate the fob as the problem, then you check the fuses and eliminate them, only connectors and TSSM left.
If everything was good before he replaced the battery, then I would think it is the fob.
I would go to the point of getting a buddies spare fob that works and reprogram it to make sure the my fob is good before I replaced the TSSM. Fobs are cheap on ebay TSSMs are not.

 

Mine are two years old and I just replaced the batteries in both. Both work just as they did prior to only changing the batteries.

 

You put the new battery in upside down.

 

Yep double check the battery. Happened to me.