Looking at the deluxe light bar. Is this thing plug and play or do the turn signals need to be spliced in to the harness?

 

My turn signal relocation kit came ready to plug and play (I didn't get the deluxe light bar). So I'd assume the deluxe setup will be the same. Take the signals out of the bars, unplug them. The new kit should come with the wires pinned and a new harness plug. Put it together and plug it in under the tank.

 

if the book don't say, I'd call the parts dept of U dealer and ask them. Then U'll know for sure.

 

Unless their like the dealers around here. Then they will order it and have to look before you know.

 

Yeah, I don't take parts guys word for crap. I'm thinking enough guys here have them that someone will know.

 

Sorry, I jsut realized I never answered your question on this. I bought my passing lamps used and the wires had been clipped off so i had to rewire the whole thing. But if you buy the Harley kit it should be much easier.

Drew

 

+1.... I got by setup from a forum brother. The wires had been cut short and the chrom rattle-caned. I moved the turn signals to the bar and rewired the whole mess, some what of a PITA.

 

The kit has bullet turn signals, so does it reuse the stockers or come with replacements that mount to the bar?

 

Mine came with new bullet signals, and if I remember correctly it was plug n play.

 

Great, I'm having a recurring turn signal issue and the tech said its a loose connection in the signal housing. I'm going with the light bar so new signals should take care of it.