Hello all
Thread Starter
|
Tourer
Joined: Jul 2011
Posts: 293
Likes: 0
From: Elkhart Kansas
Hello all
First post on the forums although I've been getting plenty of good ideas from everyone for the past couple months when I purchased my rocker in may. I'm planning on ordering some apes from br here in the next couple weeks. So my first question is does anyone know what the stock cable lengths are on a 2010 fxcwc? I'm planning on internal throttle and external clutch and brake cables. I still have yet to get a hand in measuring for height, width, and pull back and I know br requests stock lengths when ordering. So if anyone has the information so I can just do a whole package order from him I'd appreciate it.
Road Master
Joined: Feb 2011
Posts: 784
Likes: 10
From: SE Pennsylvania
First, welcome to the forum! Regarding cable lengths, if you look at the handlebar section of the HD parts catalog, there's a table near the beginning of that section that list what the cable lengths are. I think the stock lengths are listed as well as what you need for the custom bars.
Thread Starter
|
Tourer
Joined: Jul 2011
Posts: 293
Likes: 0
From: Elkhart Kansas
Thanks av8or. I do have a question about the streamline internal throttle and i know there are a few here running them. What is the outer diameter on the grip side? Or the grip inside diameter? Im wanting to put matching grips and pegs on preferably these
http://www.hammercustomcycles.com/Vi...hFtpgsTpgsGrps
Thanks for the help!
http://www.hammercustomcycles.com/Vi...hFtpgsTpgsGrps
Thanks for the help!
Club Member
Joined: May 2007
Posts: 145,895
Likes: 821
From: 40 miles Northeast of Indy..
Make sure U think Ur mods through before buying..
Solid smoothe metal grips and pegs, while maybe looking cool, will be cold on the hands in chilly weather and the pegs will make for poor/slick footing. just saying.
Solid smoothe metal grips and pegs, while maybe looking cool, will be cold on the hands in chilly weather and the pegs will make for poor/slick footing. just saying.
Ultimate HDF Member
Joined: May 2010
Posts: 7,882
Likes: 5
From: So California
I don't think those smooth pegs or grips are going to be very practical on any type of lengthy rides.
Bill makes the grip section on the bars the same diameter as the stock HD bars.
Both the pegs and grips will fit.
I'm not sure how the internal throttle locks to the grip though so it will operate when twisted?
Bill makes the grip section on the bars the same diameter as the stock HD bars.
Both the pegs and grips will fit.
I'm not sure how the internal throttle locks to the grip though so it will operate when twisted?
Trending Topics
Thread Starter
|
Tourer
Joined: Jul 2011
Posts: 293
Likes: 0
From: Elkhart Kansas
According to everything ive read the grips attach with set screws which involves drilling and tapping them i just want to know if the streamline has a greater o.d. Than factory
Edit: i had smooth grips and pegs on my 04 sporty and loved them, i never had a problem with my feet sliding off with forward controls and yes the grips do get cold but they all do. Bars will be 3" risers 1 1/4 bars 19" tall 30" wide pullback unknown still
I also believe dragon used 1 1/8 i.d. grips with his streamline
Edit: i had smooth grips and pegs on my 04 sporty and loved them, i never had a problem with my feet sliding off with forward controls and yes the grips do get cold but they all do. Bars will be 3" risers 1 1/4 bars 19" tall 30" wide pullback unknown still
I also believe dragon used 1 1/8 i.d. grips with his streamline
Last edited by LaidInk; Jul 29, 2011 at 10:57 AM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Ultimate HDF Member
Joined: May 2010
Posts: 7,882
Likes: 5
From: So California
The throttle grip is a larger inside diameter than the clutch side and if they don't recommend a special grip for the Streamline, I'd say any grip made for a HD should work.
You could always try emailing tech support at Streamline about fitment.
You could always try emailing tech support at Streamline about fitment.
Thread
Thread Starter
Forum
Replies
Last Post
