Anyone know what part #
Thread Starter
|
Outstanding HDF Member
Joined: Jan 2010
Posts: 2,264
Likes: 9
From: Rhode island
Anyone know what part #
Trying to find the part # or where to get a replacement rear splash guard/ fender extension for 2010 softail deluxe. Just the stock black plastic one.
Want to find a cheap one and try to color match it.
Want to find a cheap one and try to color match it.
Last edited by kozy22; Jan 20, 2012 at 03:36 PM.
Thread Starter
|
Outstanding HDF Member
Joined: Jan 2010
Posts: 2,264
Likes: 9
From: Rhode island
No, this is a situation that I need someone that has a parts catologs to look it up for me.
Seasoned HDF Member
Joined: Mar 2007
Posts: 66,948
Likes: 4,573
From: TOAK western branch
Thread Starter
|
Outstanding HDF Member
Joined: Jan 2010
Posts: 2,264
Likes: 9
From: Rhode island
Here you figure it out!
http://partsfinder.onlinemicrofiche....dmc&A=697&B=40
http://partsfinder.onlinemicrofiche....dmc&A=697&B=40
Never mind found it in different section
Thanks
Last edited by kozy22; Jan 20, 2012 at 04:36 PM.
Road Warrior
Joined: Nov 2011
Posts: 1,855
Likes: 3
From: North Carolina
I just got the stainless splash guard in but I'm not sure I'm going to like it. With my black lower fender paint the stock splash guard looks more like the fender is extended. Im curious what this flat piece will look like. I am thinking it's going to make the fender looker shorter. I'll have to wait until I get things back together before I decide.
Last edited by NC D'LUXE; Jan 20, 2012 at 04:50 PM.
Thread Starter
|
Outstanding HDF Member
Joined: Jan 2010
Posts: 2,264
Likes: 9
From: Rhode island
Just ordered one from surdyke but hope you get answer before I get the parts manual. lol
I just got the stainless splash guard in but I'm not sure I'm going to like it. With my black lower fender paint the stock splash guard looks more like the fender is extended. Im curious what this flat piece will look like I am thinking it's going to make the fender looker shorter. I'll have to wait until I get things back together before I decide.
I just got the stainless splash guard in but I'm not sure I'm going to like it. With my black lower fender paint the stock splash guard looks more like the fender is extended. Im curious what this flat piece will look like I am thinking it's going to make the fender looker shorter. I'll have to wait until I get things back together before I decide.
Ya, I think that one will make it look shorter and you will have a noticeable gap between the wheel and frame too. That one just goes flat against the Swingarm right?
Trending Topics
Road Warrior
Joined: Nov 2011
Posts: 1,855
Likes: 3
From: North Carolina
Yeah, it goes flat against the SA. I'm not real crazy about it and thinking it's going to do just what you said and make the fender look shorter which isn't what I want. I tried to cancel before it shipped but surdyke wouldn't cancel my damn order so they could get their 17% restocking fee. It wasn't there fault though, it was one of my stupid impulse buys. I'll hang on to it first and find someone that wants it...lol
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Outstanding HDF Member
Joined: Jan 2010
Posts: 2,264
Likes: 9
From: Rhode island
This is what I'm going for. Might try it, if it looks like **** than I'm out about $50
https://www.hdforums.com/forum/softa...ash-guard.html
https://www.hdforums.com/forum/softa...ash-guard.html
Road Warrior
Joined: Nov 2011
Posts: 1,855
Likes: 3
From: North Carolina
Agree, it'd be worth a shot and I think it would look good paint matched. Your other thread about paint is what got me to thinking I was fortunate because of my lower black fender paint. Unfortunately, it was to late to cancel my wasted $43 on this flat piece of metal. lol Just another one of those mistakes when you rush and do something not in the plan!
That's why I put off my spur of the moment thought of custom paint the other morning. lol Glad I took a few breathes before I finished boxing the tins and shipping them off! My original plan before paint is to collect used tins so I can keep my originals, so luckily I talked myself out of it - for now. I've got to put the brakes on this impulsive mind set I've developed since coming to HDF and slow down.
That's why I put off my spur of the moment thought of custom paint the other morning. lol Glad I took a few breathes before I finished boxing the tins and shipping them off! My original plan before paint is to collect used tins so I can keep my originals, so luckily I talked myself out of it - for now. I've got to put the brakes on this impulsive mind set I've developed since coming to HDF and slow down.
Thread
Thread Starter
Forum
Replies
Last Post
useR 564357348
Want To Buy Motorcycles/Parts/Accessories
0
Sep 22, 2010 08:01 PM
JustDave71
Motorcycle Parts For Sale-Misc. Parts
11
Mar 28, 2010 12:41 PM
GADave
General Harley Davidson Chat
0
Jun 23, 2006 12:36 AM