hey all. I have a 2003 fatboy. when I bought it a few years ago it had this crappy spoke wheel in the back. I have hard bags so I wanted to swap it for a fatboy solid. Today I did the swap and it went bad. first i discovered a spacer was cracked in half, then I discovered the spoke wheel was off a evo with the timken bearings so now I dont have the correct spacers. my question is how many spacers does this thing need? any idea what sizes? my local dealer was know help he said bring them in we can match them up. He couldnt grasp the concept of I dont have the right ones thats why I am calling lol. also for the guys with a stock 150 tire how tight is it in the fender?
Thanks Wils

 

According to my '04 standard, you will need 2 spacers. Approx. 1/2 on brake side, 1 13/16 belt side. You're idiot dealer should have the info/parts you need at hand. This is a stock set-up you're trying to put together. Sheesh.

 

Ok. Just called my dealer. Left side is p/n 41595-00B. Right side is 43654-00A. Hope this helps. good luck!

 

thanks a bunch for the part # my local dealer stocks nothing. and ya its a stock set up so i figured they would have a clue
*****

 

hey machinistmate, you have a 150 rear tire? how much room is there betweeen the tire sidewall and fender?

 

With a 150 you will have 1/4 inch clearance to the tire. You will have to reverse the bolts on the fender so the bolt head will clear the tire. I'm assuming yours came with a 130 tire...

 

a 150 is stock on a 03 fatboy. the odd ball rim was a 130.

 

I am running a 150 on my 01 Fatty and did not have to make any adjustments.

 

I have approx 1/2 inch on either side from widest point of a 150 tire to inside of fender. Note that I have a Standard.