Turn Signals...

Reply Subscribe

Thread Tools

Search this Thread

Dec 18, 2012 | 11:24 AM

fatboy1729

Thread Starter

Road Captain

Joined: Aug 2007

Posts: 602

Likes: 12

From: Ma.

Turn Signals...

Hey forum, I have an 06 Fat Boy in which I modified and put the front turn signals on the forks using a relocation kit. No problem at all to do. With the front of the bike all chromed and looking good, I still cannot stand looking at the signals with the wires showing. What I want to do is take the signals apart altogether and use hollow bolts and shove the wires through there and reinstall to the forks instead of seeing the wires tucked under the back side of the upper fork kit. It would definetly be more of a custom look. The only thing to worry about next is what to do with the hole where the wire came out originally. Anyone out there do this? And of so, how do you take the signals apart anyway? Thanks to all who reads this and replies with any type of advice...Sorry for the long thread...

Dec 18, 2012 | 01:17 PM

fdb2007

Road Master

Joined: Feb 2010

Posts: 884

Likes: 0

From: n

I would say go to Lowes and see if they have one of those little chrome plugs with small tangs small enough for the hole. Hardware section with the automotive speciality stuff in the drawers. Good luck