Auxiliary lights adjustment
Thread Starter
|
Cruiser
Joined: Jul 2013
Posts: 185
Likes: 10
From: Titusville, FL
Auxiliary lights adjustment
Just added a 2006 Deluxe to our stable, and one of the auxiliary lights needs to be adjusted down... any idea as to the way here; the aux lights and turn signals are mounted to the same bar and no external hardware is apparent.
Thread Starter
|
Cruiser
Joined: Jul 2013
Posts: 185
Likes: 10
From: Titusville, FL
This is exactly what I needed for my 2008 Heritage. A little different setup on the 2006 Deluxe; I decided to take the trim ring off the aux light needing adjustment, andfound that a 1/2" open end would do the trick for that one.
Thanks, Larry!
Thanks, Larry!
Tourer
Joined: May 2012
Posts: 453
Likes: 0
From: Clarkston
You gotta take the trim ring and lamp housing off then there is a 1/2" nut that you loosen to adjust the light and turn signal. It's pretty simple but you will need to hold the turn signal too while tightening.
Thread
Thread Starter
Forum
Replies
Last Post
