Rigid Sideplates Installation question
Thread Starter
|
Advanced
Joined: Feb 2007
Posts: 59
Likes: 0
From: Vancouver, BC
Rigid Sideplates Installation question
I purchased a set of rigid sideplates on eBay and as there were no intructions included I have a question I hope someone here can answer.
Should I remove the red reflectors on the fender struts or am I supposed to use a washer or spacer between the sideplates and the strut so that the reflector stays?
Thanks in advance for your suggestions.
Should I remove the red reflectors on the fender struts or am I supposed to use a washer or spacer between the sideplates and the strut so that the reflector stays?
Thanks in advance for your suggestions.
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 35
From: Rochester, NY
RE: Rigid Sideplates Installation question
Some are cut out to go over the top of them, otherwise check the mountings. If it mounts against the rail pull them off and put them on the side plates. If they mount away from the rails, like somedetatcable mountingsmaybe you can leave them on.
Thread
Thread Starter
Forum
Replies
Last Post
