2003 Fatboy 95 Build Start
Thread Starter
|
Cruiser
Joined: Feb 2007
Posts: 195
Likes: 0
From:
2003 Fatboy 95 Build Start
Build will be for a 2003 Fatboy TwinCam 88B to a 95 Bad *** I Hope.
Headwork with all the good stuff.
Redshift Cams 575 Lift
Andrews grear drive
S&S Adj. Pushrods
48 Mill. Throttle Body
Jugs 95
Jims Roller Rockers
Rocker Plates
JE Pistons 10 1/2 to 1
Harley Race Tuner
And all the Little stuff,Tuned and Dyno. Dropped today should be ready to pick up sometime next weekend. Now I just need the Weather to break here.
Will Update.
[IMG]local://upfiles/25219/BC457686F73D4B4F95A1D5AF6D49FD81.jpg[/IMG]
Headwork with all the good stuff.
Redshift Cams 575 Lift
Andrews grear drive
S&S Adj. Pushrods
48 Mill. Throttle Body
Jugs 95
Jims Roller Rockers
Rocker Plates
JE Pistons 10 1/2 to 1
Harley Race Tuner
And all the Little stuff,Tuned and Dyno. Dropped today should be ready to pick up sometime next weekend. Now I just need the Weather to break here.
Will Update.
[IMG]local://upfiles/25219/BC457686F73D4B4F95A1D5AF6D49FD81.jpg[/IMG]
Road Captain
Joined: Aug 2005
Posts: 503
Likes: 2
From: Dallas, Tx
RE: 2003 Fatboy 95 Build Start
My brother has a 06 FHLX with the stage 1 big bore kit (95") and it is fast. He will pull right away from me and his bike is almost 100lbs heavier. I think you will be very PLEASED!!!!
Thread Starter
|
Cruiser
Joined: Feb 2007
Posts: 195
Likes: 0
From:
RE: 2003 Fatboy 95 Build Start
For the money I better Rip 3rd gear ALL day. Cant wait going in Monday to drop off my New clutch and inner Prime to the shop and see what my bike baselined on the Dyno.
Thread
Thread Starter
Forum
Replies
Last Post
