breakout blackline dash - NEED HELP!
Thread Starter
|
Cruiser
Joined: Feb 2014
Posts: 155
Likes: 1
From: Cypress
breakout blackline dash - NEED HELP!
anyone have the blackline dash mod? i am in dire need of help. i have no idea what is different, but the bolt on the tank is INCHES from lining up. i cant get it secured at all. if its not bolted down, the dash sticks up too far and the bottom of the gauge catches it. what a f'ing nightmare. i thought this was direct bolt?
any ideas? help?
any ideas? help?
Thread Starter
|
Cruiser
Joined: Feb 2014
Posts: 155
Likes: 1
From: Cypress
****. nevermind. i just caught this thread:
https://www.hdforums.com/forum/softa...your-help.html
guess the parts books are STILL wrong. they told me i already had that on my bike. i didnt obviously.
now... what are the chances of find a 60900001 in stock in houston?
for those that have done it: im assuming that it comes with the gasket, or do i reuse my old one?
https://www.hdforums.com/forum/softa...your-help.html
guess the parts books are STILL wrong. they told me i already had that on my bike. i didnt obviously.
now... what are the chances of find a 60900001 in stock in houston?
for those that have done it: im assuming that it comes with the gasket, or do i reuse my old one?
Road Master
Joined: Nov 2009
Posts: 852
Likes: 5
From: Virginia Beach, VA
****. nevermind. i just caught this thread:
https://www.hdforums.com/forum/softa...your-help.html
guess the parts books are STILL wrong. they told me i already had that on my bike. i didnt obviously.
now... what are the chances of find a 60900001 in stock in houston?
for those that have done it: im assuming that it comes with the gasket, or do i reuse my old one?
https://www.hdforums.com/forum/softa...your-help.html
guess the parts books are STILL wrong. they told me i already had that on my bike. i didnt obviously.
now... what are the chances of find a 60900001 in stock in houston?
for those that have done it: im assuming that it comes with the gasket, or do i reuse my old one?
Thread Starter
|
Cruiser
Joined: Feb 2014
Posts: 155
Likes: 1
From: Cypress
Buy the part I listed or 24v listed in the thread (60900001) and you're good to go - the parts catalog is wrong as you've realized, you have Top Plate 60900003 installed on your Breakout, not 60900001 which is what you need. You don't need a new gasket either. Let me know if you have any questions.
Man that's aggravating. I went in with 24v part list, but they told me I already had that part and could reuse it. I hadn't seen the thread that discovered the issue... so thought maybe it was an inconsistency issue from 13 to 14. Now I know.
6th Gear
Joined: Oct 2013
Posts: 10
Likes: 0
From: arkansas
Trending Topics
Road Master
Joined: Nov 2009
Posts: 852
Likes: 5
From: Virginia Beach, VA
You should've read my thread first, haha.......but it's all good because now you're sporting a nice tank dash!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Road Master
Joined: Nov 2009
Posts: 852
Likes: 5
From: Virginia Beach, VA
I think I had about 1/4th inch total but regardless it was tight.
Thread
Thread Starter
Forum
Replies
Last Post