883l will not start
Thread Starter
|
Stage I
Joined: Sep 2019
Posts: 1
Likes: 0
From: TN
883l will not start
I have a 2012 Sportster 883l. Bike will turn over but will not start. After some extensive troubleshooting and checking and cleaning all electrical connection I found that I wasn't getting the ground on terminal 2 (GN/O wire) of the ECM that controls the system relay. If I ground the system relay wire (GN/O) the bike fires and runs, it sets an ECM fault when i do this, i apologize I dont recall the fault number at the moment. It looks to be a bad ECM. This all started from a bad battery and nothing has been right since. After replacing the batter the system wasn't charging. Bike would start and run but not charge,found bad voltage regulator, turned bike off, covered it up until new voltage regulator arrived. Installed new regulator and now bike wont fire and this is where Im at. Please any help or guidance would be appreciated.
Thank you
Thank you
