Some More Pics
Thread Starter
|
Tourer
Joined: Jun 2007
Posts: 485
Likes: 0
From: Brisbane , QLD Australia
RE: Some More Pics
The bars are a Ventura Mid Western, The standard bars to me where to not wide enough
as I felt I had my elbows tucked in to my body and it felt awkward.
Here is where you can get them in the US
Distributor Details Address Distributor: CycleVenture Street: 6911-A 216th Street SW Suburb:
City: Lynnwood Postcode: WA 98036-7348 Contact Details Person:
Email: ventura@cycleventure.com Phone: 800 688 6439 Fax: (425) 771 4246 Website: http://www.cycleventure.com
HD06 is the ones I have which are 1" Bars with dimples ( I have mine wired internally)
HD13 is a 1 1/4" bar with dimples.
as I felt I had my elbows tucked in to my body and it felt awkward.
Here is where you can get them in the US
Distributor Details Address Distributor: CycleVenture Street: 6911-A 216th Street SW Suburb:
City: Lynnwood Postcode: WA 98036-7348 Contact Details Person:
Email: ventura@cycleventure.com Phone: 800 688 6439 Fax: (425) 771 4246 Website: http://www.cycleventure.com
HD06 is the ones I have which are 1" Bars with dimples ( I have mine wired internally)
HD13 is a 1 1/4" bar with dimples.
Thread Starter
|
Tourer
Joined: Jun 2007
Posts: 485
Likes: 0
From: Brisbane , QLD Australia
RE: Some More Pics
Cheers Guys,
I am really happy with it and considering I had never seen the colour and picked it out of the dogalog.
I have a few more mods to go yet, the Haulen *** bitch bar should be here 2morow and will fit that asap to keep the wifey happy.
Then the list will be as follows
Willie G Front Pegs
Willie G Brake Pedal Pad
Willie G Trimmed Glide Passenger Foot Boards ( keep the wifes feet of my short shots)
Braided Cables
Shocks Front and Rear
A Hypercharger (When they decide to make one that fits Sporty Injected Models)
Slight Mod To My Side Covers
Bob Tail Rear Guard ( Was ordered when the bike was ordered in June 07 and Still has not arrived from HD)
Chrome Levers
Relocate all Turn Signals
and Misc chrome bits
More Than Likely the First Thing I will order thou is these little puppies.
With matching Rotors and Pulley.
These will be a bit tricky as we have a $1000 limit on imports before they stick us bucket loads for Import Duties and GST.
So I need to find a friendly supplier that is sympathetic to my cause[8D]
I am really happy with it and considering I had never seen the colour and picked it out of the dogalog.
I have a few more mods to go yet, the Haulen *** bitch bar should be here 2morow and will fit that asap to keep the wifey happy.
Then the list will be as follows
Willie G Front Pegs
Willie G Brake Pedal Pad
Willie G Trimmed Glide Passenger Foot Boards ( keep the wifes feet of my short shots)
Braided Cables
Shocks Front and Rear
A Hypercharger (When they decide to make one that fits Sporty Injected Models)
Slight Mod To My Side Covers
Bob Tail Rear Guard ( Was ordered when the bike was ordered in June 07 and Still has not arrived from HD)
Chrome Levers
Relocate all Turn Signals
and Misc chrome bits
More Than Likely the First Thing I will order thou is these little puppies.
With matching Rotors and Pulley.
These will be a bit tricky as we have a $1000 limit on imports before they stick us bucket loads for Import Duties and GST.
So I need to find a friendly supplier that is sympathetic to my cause[8D]
Thread Starter
|
Tourer
Joined: Jun 2007
Posts: 485
Likes: 0
From: Brisbane , QLD Australia
RE: Some More Pics
You could ask the manufacturer for exact specs at dold@dold.co.nz
Roughly they are 4" rise, 12" Pullback and 40" Wide
Roughly they are 4" rise, 12" Pullback and 40" Wide
Thread
Thread Starter
Forum
Replies
Last Post
hdpearson13
General Harley Davidson Chat
15
Mar 26, 2008 08:27 PM
