Poor man's fender
My drop seat rocks several cheap bastard parts.
Front fender I picked up from some FLH. Got it from Ebay for 20 bucks. These are on there alot. When an FLH is lowered too much the fender will smack the lower tree and it's a pretty easy fix.

Hammered out the dent on top & scuffed it up a little to expose the transition from the fender to the skirted sides. Trick I learned from my skateboarding days & regripping my decks.

Highlighted a cut line with a Sharpie

Cut the skirts off


What's left is pretty cool but a little too wide for what I want so I marked 1.5" down the center and cut that section out


Tacked together without the center




Take what you have, make what you want. Put down the catalogue, dig out some old parts & cut em up!
Thanks!
Trending Topics
That bike is going to look brutally cool!!
The Best of Harley-Davidson for Lifelong Riders





